SP Flash Tool Download
SP Flash Tool is a
handy program that allows you to do various tasks such as flash custom ROMs, stock
recovery, stock ROM. The SP Flash Tool Download only compatible with MediaTek
devices so if you have a non-MediaTek device, you need to move to an
alternative for SP Flash Tool. However, the downloading and installing process
of SP Flash Tool is completely simple and straightforward to do by anyone who
has an MTK based device. All you have to do is click on the download button and
follow the on-screen instructions.
- Allows you to flash stock firmware and RAM on an Android MediaTek phone using an MTK or scatter file.
- The system firmware folder can be improved or deteriorated using SP Flash Tool Download.
- Custom recovery flashing on a MediaTek scatter-based system.
- The flashing method is extremely versatile.
- Set parameters using parameter settings, and allow the parameter menu information to be read and written.
- Devices with the MediaTek Chipset can be unbricked and formatted.
Pre-requirements
to use SP Flash Tool
Download the
latest SP Flash Tool on your device get ready with a proper USB cable to
connect your device to the computer. The latest MediaTek USB V-COM drivers
should be installed on your computer. Most MediaTek devices are supported by
the VCOM driver. However, if this driver does not function, you can try the Android
CDC Driver as a backup. Appropriate Firmware for your computer should be
downloaded before using the SP Flash Tool.
The firmware
should include a Scatter file. Also, you need a laptop or desktop computer. It
can be Windows or Linux device. Almost all Windows operating systems have supported this tool including Windows XP, Windows Vista, Windows 7, Windows 8,
Windows 8.1, and Windows 10. Create a full backup of existing data on your
MediaTek Android device to prevent data loss.
How to use SP
Flash Tool Download with your MediaTek device?
You can use the
download page of our official SP Flash Tool website to get the latest version
of this program. Then enable USB debugging and developer options on your mobile
device and turn it off. Download the Stock or Custom ROM, as well as the SP
Tool, to your desired location. As an administrator, run Sptool.exe. Locate
your Scatter file in the ROM folder, which is most likely called “txt.”. Now,
from the drop-down menu, choose firmware update rom and click the download
button.
Connect your phone
that has been turned off, to your computer or laptop using a USB cable. Your
phone will be recognized by the SP tool, and the process will begin
automatically. After the ROM has been downloaded to your phone, a green signal
will appear, indicating that the process is completed. Now you can disconnect
your phone and use it with the new ROM. Make sure that this flashing process is
not interrupted by anything otherwise the SP Flash Tool will not be able to do
the best performance on your device.
Comments
Post a Comment